MSI Gaming GS65 Stealth-005 RAM upgrade specifications

MSI GS65 Stealth-005 MSI GS65 Stealth-005 MSI GS65 Stealth-005 MSI GS65 Stealth-005 MSI GS65 Stealth-005

The MSI GS65 Stealth-005 Gaming series laptop features two SO-DIMM slots for memory upgrades. Maximum RAM capacity reaches 32 GB with DDR4-SDRAM memory operating at 2666 MHz. Compatible upgrade modules must utilize the SO-DIMM form factor and DDR4 specifications to ensure proper functionality. Current memory configurations can be expanded through single or dual module installations within the available slots.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2666 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2666 (PC4-21328)
Bandwidth21.3 GB/s
Laptop Release date12 February 2019

Additional Notes

  • The internal motherboard layout of the MSI GS65 Stealth-005 features an inverted design which necessitates the removal of the entire mainboard to access the SO-DIMM slots for any capacity increases.
  • Dual-channel memory architecture requires matching modules in both slots to achieve maximum theoretical bandwidth and minimize frame time variations during high-load processing.
  • The integrated memory controller will downclock higher frequency modules to 2666 MHz if components with faster rated speeds are installed.
  • Physical clearance constraints within the ultra-slim chassis prevent the installation of memory modules equipped with thick heat spreaders.
  • System stability depends on using non-ECC unbuffered modules because the chipset does not support error-correcting code functionality.
  • Exceeding the 32 GB threshold leads to a failure to boot or persistent BIOS recognition errors due to firmware addressing limitations.
  • Removing the factory seal to reach the memory banks may impact localized warranty terms depending on regional consumer protection laws regarding user-serviceable parts.
  • Latency performance relies on the highest common JEDEC profile supported by both horizontal slots to avoid system instability.