MSI Gaming GS66 10SE-229 Stealth RAM upgrade specifications
The MSI GS66 10SE-229 Stealth gaming laptop supports DDR4-SDRAM memory upgrades with two SO-DIMM slots. Maximum RAM capacity reaches 64 GB, allowing users to expand memory from factory configurations. Compatible memory modules operate at 2666 MHz frequency. Upgrade specifications indicate SO-DIMM form factor memory modules are required for this gaming series. Existing memory can be supplemented or replaced to achieve maximum supported capacity of 64 GB total across both available slots.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 11 June 2020 |
Additional Notes
- Dual channel architectural support is limited to symmetric module pairings within the 2 available slots to maintain peak memory throughput.
- The MSI GS66 10SE-229 Stealth motherboards utilize an inverted design that requires complete removal of the mainboard for physical access to the memory modules during upgrades.
- Synchronizing higher frequency modules results in automatic downclocking to the 2666 MHz hardware limitation dictated by the chipset integration.
- Replacement of existing internal modules is necessary for capacity increases due to the absence of unpopulated expansion slots.
- Latencies and timings are restricted by the BIOS to JEDEC standard profiles rather than high performance XMP configurations for stability.
- Internal thermal pads on the memory chips must be preserved or replaced during service to prevent heat saturation within the thin chassis profile.
- Voltage requirements for expansion components must adhere to 1.2V standards to ensure compatibility with the power delivery system.