MSI Gaming GS66 10SE-442 Stealth RAM upgrade specifications
The MSI GS66 10SE-442 Stealth gaming laptop features DDR4-SDRAM memory upgrade capabilities with two SO-DIMM slots supporting a maximum RAM capacity of 64 GB. Compatible memory modules operate at 3200 MHz frequency. Specifications indicate SO-DIMM form factor modules are required for upgrade compatibility with the GS series notebook. Current and expanded memory configurations utilize DDR4 technology standards for the GS66 gaming family.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 11 June 2020 |
Additional Notes
- Dual channel architecture requires matching memory modules in both slots to provide maximum theoretical bandwidth for the processor.
- Physical access to the motherboard for the MSI GS66 10SE-442 Stealth involves removing the bottom chassis cover which may require breaking a factory seal depending on regional warranty policies.
- The 64 GB capacity limit necessitates the use of high density 32 GB modules in each available slot to reach the maximum configuration.
- Non parity modules are required as the system lacks support for ECC error correction protocols.
- The 10th Gen Intel architecture may downclock the frequency to 2666 MHz or 2933 MHz depending on the specific CPU tier integrated into the system.
- Memory installation requires 260 pin modules designed specifically for mobile platforms as desktop sized units are incompatible with the internal spatial constraints.
- The presence of 2 dedicated slots ensures that existing lower capacity modules must be removed and replaced rather than supplemented to reach the maximum supported ceiling.