MSI Katana 11UC-211FR RAM upgrade specifications
MSI Katana GF66 11UC-211FR laptop supports DDR4-SDRAM memory upgrade configuration. The system features two SO-DIMM slots for memory expansion. Maximum supported capacity reaches 64 GB total RAM. Compatible memory modules operate at 3200 MHz frequency. Upgrade specifications indicate SO-DIMM form factor memory modules are required for this model. The Katana GF66 series accommodates memory expansion through dual SO-DIMM slots, enabling users to increase system memory capacity up to maximum specifications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 19 May 2021 |
Additional Notes
- The dual-channel motherboard configuration requires balanced pairs to maintain peak memory bandwidth and prevent single-channel performance bottlenecks.
- Upgrading the MSI Katana 11UC-211FR to the 64 GB threshold necessitates the removal of all pre-installed modules since no additional expansion slots exist beyond the primary 2.
- Latency parity between modules is essential to avoid system stability issues because the BIOS will automatically clock all RAM down to the speed of the slowest installed stick.
- Internal component access involves a bottom panel removal which may expose sensitive thermal pads and delicate ribbon cables near the SO-DIMM area.
- Non-ECC unbuffered modules are required for compatibility as the chipset does not support error-correcting code memory logic.
- High-density 32 GB modules must utilize the 1.2V standard to ensure compatibility with the existing power delivery system on the motherboard.
- Physical clearance within the chassis restricts the use of modules with integrated heat spreaders that exceed standard vertical SO-DIMM height tolerances.