MSI Modern 14 B10MW-486 RAM upgrade specifications
The MSI Modern 14 B10MW-486 laptop contains one SO-DIMM memory slot supporting DDR4-SDRAM specifications. The maximum RAM capacity for this model is 32 GB, with compatible modules operating at 3200 MHz frequency. Memory upgrade options are limited to single-slot configuration, allowing users to expand the existing memory capacity up to the specified maximum through compatible SO-DIMM modules.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 08 April 2021 |
Additional Notes
- The presence of a single SO-DIMM slot prevents the utilization of dual channel memory architecture, limiting the processor to single channel memory bandwidth regardless of the installed capacity.
- Upgrading the MSI Modern 14 B10MW-486 necessitates the complete removal and replacement of the existing module because no secondary expansion slots are available for cumulative memory increases.
- While the hardware supports 3200 MHz modules, the actual operating frequency remains dependent on the integrated memory controller of the 10th Gen Intel processor which may downclock the RAM to 2666 MHz.
- The maximum 32 GB threshold indicates that the motherboard firmware does not support high density 64 GB modules, establishing a rigid ceiling for memory intensive multitasking or virtual machine hosting.
- Single slot configurations increase the performance impact of integrated graphics as the GPU must share the limited single channel bandwidth with the central processing unit.
- Physical installation requires a non-ECC unbuffered 260-pin module to maintain system stability and POST compatibility.