MSI Modern 14 B11MO-019XIT RAM upgrade specifications
The MSI Modern 14 B11MO-019XIT laptop features DDR4-SDRAM memory upgrade capabilities with two SO-DIMM slots supporting maximum RAM capacity of 64 GB. Compatible memory modules operate at 3200 MHz frequency specifications. The upgrade slots accommodate SO-DIMM form factor modules, enabling users to expand the system's memory configuration from baseline specifications up to the maximum supported capacity of 64 GB total memory.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 16 January 2021 |
Additional Notes
- The MSI Modern 14 B11MO-019XIT contains 2 SO-DIMM slots, establishing a maximum dual-channel configuration limited to 64 GB total capacity. Populating both slots with matching modules will prevent single-channel mode performance degradation.
- DDR4-3200 memory operates within the standard frequency range for 11th-generation Intel processors. Upgrading to faster DDR4 variants (3600 MHz or beyond) will not yield performance gains due to memory controller frequency locks in the host chipset.
- SO-DIMM modules occupy confined internal space. Tall heat-spreader designs or aftermarket coolers on memory modules may cause physical obstruction during installation, particularly if the system lid or adjacent components sit close to the memory bay.
- The 64 GB ceiling reflects SO-DIMM density constraints rather than chipset limitations. Individual module capacity is capped at 32 GB per slot, requiring 2x32 GB configurations to achieve the maximum specification.
- Warranty retention typically permits end-user RAM installation when modules match the OEM-approved frequency and timing specifications. Modules deviating from DDR4-3200 profiles may void coverage or trigger compatibility flags during system POST routines.
- Replacement or addition of memory modules does not require BIOS modifications. The SPD (Serial Presence Detect) data on module pins communicates specifications to the firmware automatically upon boot.