MSI Modern 14 B11MOL-428IT RAM upgrade specifications

The MSI Modern 14 B11MOL-428IT laptop features two SO-DIMM slots for DDR4-SDRAM memory upgrade. Maximum supported RAM capacity reaches 64 GB total. Compatible memory modules operate at 3200 MHz frequency. Specifications indicate the device supports DDR4-SDRAM memory technology with SO-DIMM form factor slots. RAM upgrade options accommodate expanded memory configurations for enhanced system performance on the MSI Modern 14 series notebook.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM64 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date02 June 2021

Additional Notes

  • The 3200 MHz frequency specification requires compatible modules to run at JEDEC standard timings, as higher XMP profiles may not be supported by the Intel 11th generation mobile platform in this MSI Modern 14 B11MOL-428IT configuration.
  • Both SO-DIMM slots support dual-channel architecture when populated with matched capacity modules, effectively doubling memory bandwidth compared to single-channel operation with asymmetric configurations.
  • The 64 GB maximum capacity indicates compatibility with 32 GB density modules per slot, which requires specific IC configurations not available in older module generations.
  • DDR4-SDRAM modules operating below 3200 MHz will function but default to their rated speed, resulting in reduced memory subsystem throughput for bandwidth-sensitive workloads.
  • The SO-DIMM form factor restricts module height to approximately 30 mm, preventing installation of standard DIMM modules used in desktop systems.
  • Module installation requires bottom panel removal on this chassis design, with potential warranty implications if manufacturer seals are broken during the upgrade process.
  • Mixing module capacities across the 2 slots maintains functionality but disables dual-channel mode for the capacity exceeding the smaller module, creating an asymmetric memory architecture.
  • Non-ECC unbuffered modules are required for this consumer platform, as registered or error-correcting memory types will not initialize during POST.
  • Operating voltage is fixed at 1.2V for DDR4 specification compliance, preventing use of low-voltage DDR4L modules designed for different power envelopes.
  • The Intel Tiger Lake chipset in this platform enforces memory training protocols that may reject modules with incompatible SPD profiles, even if physical specifications match.