MSI Modern 14 B11MOU-1076AU RAM upgrade specifications
The MSI Modern 14 B11MOU-1076AU laptop features DDR4-SDRAM memory upgrade capabilities with 2x SO-DIMM slots supporting a maximum capacity of 64 GB. The memory modules operate at 3200 MHz frequency. Compatible RAM upgrades must utilize the SO-DIMM form factor specifications for this MSI Modern series laptop model. Current memory configuration and available slots allow for expandable storage capacity through DDR4 module installation.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 26 April 2022 |
Additional Notes
- The MSI Modern 14 B11MOU-1076AU supports dual-channel memory architecture through its 2 SO-DIMM slots, enabling bandwidth of up to 51.2 GB/s when both slots are populated with matched modules.
- Upgrading to a single module configuration reduces memory bandwidth by approximately 50 percent compared to dual-channel operation, potentially impacting integrated graphics performance and multi-threaded workloads.
- The 64 GB maximum capacity requires 2 modules of 32 GB each, as SO-DIMM modules above this density are not compatible with the 11th generation Intel platform chipset.
- Installing modules with mismatched speeds forces all memory to operate at the lowest common frequency, eliminating the performance advantage of higher-rated modules.
- The 3200 MHz specification represents JEDEC standard speeds rather than overclocked profiles, meaning XMP or extreme memory profile settings are not required for full-speed operation.
- Physical access to both memory slots may require complete bottom panel removal, as many Modern series designs position one slot beneath the primary module rather than side-by-side.
- Mixing different module capacities across the 2 slots enables flex mode operation but prevents true dual-channel access for the memory portion exceeding the smaller module's capacity.
- DDR4 voltage tolerance of 1.2V nominal means that low-voltage DDR4L modules rated at 1.05V will function but may not provide stability advantages on this platform.
- The SO-DIMM form factor restriction eliminates compatibility with standard desktop DIMM modules despite identical DDR4 technology and speed ratings.
- Memory module height limitations in ultraportable chassis typically restrict installation to single-sided or specific double-sided configurations under 30mm total thickness.