MSI Modern 15 A10M-219XIT RAM upgrade specifications
The MSI Modern 15 A10M-219XIT laptop features two SO-DIMM memory slots supporting DDR4-SDRAM specifications. The system accommodates a maximum RAM capacity of 64 GB total memory. Memory modules operate at 2666 MHz frequency. Upgrade options are compatible with standard SO-DIMM form factor modules. The laptop's memory specifications enable expansion from factory-installed configurations to the maximum supported capacity through replacement or additional compatible DDR4 RAM modules in the available slots.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 12 March 2020 |
Additional Notes
- The MSI Modern 15 A10M-219XIT accepts standard 260-pin SO-DIMM modules, eliminating compatibility concerns with desktop-oriented DIMM form factors.
- Both memory slots support dual-channel operation, which doubles the theoretical memory bandwidth when populated with matched capacity modules.
- The 2666 MHz frequency ceiling aligns with JEDEC DDR4 standards, meaning higher-rated modules at 3200 MHz or above will downclock to this specification.
- Installing a single module forces the memory controller into single-channel mode, reducing bandwidth by approximately 50% compared to dual-channel configurations.
- The 64 GB maximum capacity requires two 32 GB SO-DIMM modules, a configuration that may prove costlier per gigabyte than traditional 8 GB or 16 GB density options.
- Memory access latency remains fixed by the 2666 MHz specification regardless of installed module timings, as the system enforces standardized CAS latency parameters.
- Mixing modules of different capacities or speeds across the two slots triggers automatic downclocking to the lowest common frequency and may disable dual-channel mode depending on capacity asymmetry.
- The SO-DIMM slots typically reside beneath a removable bottom panel, though accessing them may void manufacturer warranty depending on regional service policies.
- DDR4-2666 voltage operates at the standard 1.2V specification, preventing compatibility issues with low-voltage or XMP-oriented modules that require BIOS voltage adjustments unavailable in most laptop firmware.
- The dual-slot configuration limits future expansion to complete module replacement rather than incremental capacity additions once both slots reach occupancy.