MSI Modern 15 A10RAS-231 RAM upgrade specifications
MSI Modern 15 A10RAS-231 laptop memory upgrade specifications include two SO-DIMM slots supporting DDR4-SDRAM memory modules. Maximum RAM capacity reaches 64 GB total, with compatible modules operating at 2666 MHz frequency. Upgrade options accommodate standard SO-DIMM form factor memory sticks, allowing users to expand from original factory configuration up to specified maximum capacity through compatible DDR4 memory upgrades.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 19 May 2020 |
Additional Notes
- The MSI Modern 15 A10RAS-231 relies on 10th generation Intel processors that cap memory speed at 2666 MHz, meaning faster rated modules will downclock to match this ceiling.
- The dual SO-DIMM configuration operates in dual-channel mode when both slots contain matched capacity modules, effectively doubling memory bandwidth compared to single-stick installations.
- Reaching the 64 GB ceiling requires two 32 GB SO-DIMM modules, which command higher pricing per gigabyte than standard 8 GB or 16 GB densities.
- DDR4 SO-DIMM modules measure 69.6 mm in length compared to standard 133.35 mm desktop DIMMs, making form factor verification critical before purchase.
- Memory running at 2666 MHz delivers approximately 21.3 GB/s theoretical bandwidth per channel, totaling 42.6 GB/s in dual-channel configuration.
- Mixing modules with different speeds forces all installed memory to operate at the slowest module's frequency, potentially negating performance gains from higher-spec purchases.
- The 260-pin SO-DIMM standard used in this model differs from the 204-pin DDR3 SO-DIMM format, preventing accidental installation of incompatible older generation memory.
- Accessing the memory compartment typically requires bottom panel removal, which may involve breaking factory seals that affect warranty status depending on regional regulations.
- Single-rank versus dual-rank module architecture affects latency characteristics, with dual-rank configurations sometimes providing marginal performance advantages in memory-intensive workloads despite identical clock speeds.
- The 2666 MHz JEDEC specification operates at 1.2 volts standard, while lower voltage variants risk compatibility issues with motherboard voltage regulation.