MSI Prestige 15 A10SC-294AU RAM upgrade specifications
MSI Prestige 15 A10SC-294AU laptop memory upgrade specifications indicate DDR4-SDRAM compatibility with 2x SO-DIMM slots. Maximum RAM capacity reaches 64 GB total. Existing memory operates at 2666 MHz frequency. Compatible upgrade modules must utilize SO-DIMM form factor and DDR4-SDRAM specifications. Current configuration supports dual-channel memory architecture for enhanced system performance.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 16 May 2020 |
Additional Notes
- Dual channel memory architecture requires installing modules in pairs to maximize the integrated memory controller throughput for the MSI Prestige 15 A10SC-294AU.
- The maximum capacity limit of 64 GB necessitates 32 GB modules in each slot which avoids the memory density limitations of older chipset generations.
- Installing modules with higher rated frequencies than 2666 MHz results in automatic downclocking to match the system bus overhead and maintains timing stability.
- Standard SO-DIMM height requirements restrict the use of thick aftermarket heat spreaders that interfere with the low profile chassis clearance.
- Physical access to both slots requires total removal of the bottom panel assembly which involves navigating internal ribbon cables and integrated thermal solutions.
- Matching the CAS latency across both slots prevents boot failures and ensures the system operates at the highest common denominator speed.
- Reliability for content creation tasks is optimized by using non-ECC unbuffered modules as the hardware lacks support for error correcting code parity.