MSI Prestige PE62 8RD-023FR RAM upgrade specifications

MSI PE62 8RD-023FR MSI PE62 8RD-023FR MSI PE62 8RD-023FR MSI PE62 8RD-023FR MSI PE62 8RD-023FR

The MSI Prestige P series PE62 8RD-023FR laptop features DDR4-SDRAM memory with two SO-DIMM slots for RAM upgrade capability. The maximum supported memory capacity reaches 32 GB total. Compatible upgrades operate at 2400 MHz frequency specifications. Current memory configuration specifications and upgrade options are available for this model to enhance processing performance and multitasking capabilities.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2400 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2400 (PC4-19200)
Bandwidth19.2 GB/s
Laptop Release date07 June 2019

Additional Notes

  • The MSI Prestige PE62 8RD-023FR contains 2 memory slots with no reported empty slots, indicating any capacity expansion requires replacement of existing modules rather than additive installation.
  • DDR4-2400 MHz represents a non-standard specification relative to contemporary 8th-generation Intel platforms, which typically support DDR4-2666 or higher, resulting in potential bandwidth underutilization if faster memory is installed.
  • SO-DIMM form factor mandates laptop-specific memory modules; desktop DDR4 DIMMs cannot be physically installed, eliminating cost advantages from bulk or surplus inventory sources.
  • The 32 GB maximum capacity ceiling constrains multithreaded workloads and virtual machine deployments; applications exceeding this threshold cannot be accommodated through hardware upgrades on this chassis.
  • Replacement of both 2 SO-DIMM slots simultaneously to reach the 32 GB maximum creates a single failure point; loss of one module renders the entire capacity inaccessible unless both are replaced together.
  • Memory frequency compatibility should be verified against BIOS revision specifications, as older firmware may not recognize or properly initialize DDR4-2400 modules from certain manufacturers without updates.
  • The dual-slot configuration provides no redundancy options such as RAID or memory mirroring, limiting data integrity strategies available through hardware configuration alone.