MSI Prestige PS42 8RB-439IT RAM upgrade specifications
The MSI Prestige PS42 8RB-439IT supports DDR4-SDRAM memory upgrades with specifications limited to a single SO-DIMM slot. Maximum RAM capacity reaches 16 GB, with memory operating at 2400 MHz frequency. The laptop contains one memory slot available for upgrade, compatible with standard SO-DIMM form factor modules. Current memory specifications support DDR4 technology, establishing the parameters for compatible RAM upgrades on this particular Prestige PS series model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2400 MHz |
| Maximum RAM | 16 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2400 (PC4-19200) |
| Bandwidth | 19.2 GB/s |
| Laptop Release date | 03 April 2019 |
Additional Notes
- The MSI Prestige PS42 8RB-439IT contains a single memory slot, which means any RAM upgrade requires removing the existing module rather than adding a second stick. This architecture eliminates the possibility of achieving dual-channel memory performance, a configuration that typically improves bandwidth by approximately 50 percent in consumer workloads.
- DDR4-2400 modules operate at a reduced frequency compared to contemporary DDR4 standards (3200 MHz and above became mainstream after 2017). Retrofitting faster memory will downclock to 2400 MHz due to JEDEC standard compliance, negating any performance advantage from higher-frequency purchases.
- The 16 GB capacity ceiling creates a permanent constraint on memory-intensive workflows such as video editing, 3D rendering, or virtualization. Applications requiring 32 GB or more cannot run on this platform regardless of storage or processor specifications.
- SO-DIMM form factor adoption indicates this is a portable ultrabook design. The compact memory slot carries higher failure risk during installation compared to full-size DIMM slots due to reduced mechanical tolerance and pin durability.
- Warranty considerations apply to memory upgrades on this model. Many manufacturers restrict coverage if non-OEM modules are installed, particularly when exceeding original specifications. Verification with MSI support is required before purchasing third-party RAM to preserve coverage.
- The single-slot design with a 16 GB maximum suggests the factory configuration likely shipped with 8 GB, leaving half the addressable capacity unutilized in base configurations. Upgrading captures dormant performance only if the original module remains below 8 GB.