MSI Sword 15 A11UD-1028MX RAM upgrade specifications

MSI 15 A11UD-1028MX MSI 15 A11UD-1028MX MSI 15 A11UD-1028MX MSI 15 A11UD-1028MX MSI 15 A11UD-1028MX

MSI 15 A11UD-1028MX laptop memory upgrade specifications indicate DDR4-SDRAM compatibility with two SO-DIMM slots. Maximum supported RAM capacity reaches 64 GB with DDR4-3200 MHz frequency. Upgrade options allow expansion of the existing memory configuration through the available SO-DIMM slots. Compatible memory modules must meet DDR4 specifications and 3200 MHz frequency requirements. The Sword 15 series laptop supports standard SO-DIMM form factor memory upgrades for enhanced multitasking and performance capabilities.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM64 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date16 March 2022

Additional Notes

  • The MSI Sword 15 A11UD-1028MX contains 2 physical memory slots, meaning only 1 existing module can remain installed during maximum capacity upgrades; the second slot must receive a replacement module rather than accept an additional one.
  • DDR4-3200 modules operate at a fixed frequency; upgrading to faster DDR4 variants (3600 MHz or higher) will downclock to 3200 MHz due to JEDEC standard limitations, resulting in no performance gain from premium-speed memory purchases.
  • SO-DIMM form factor requires laptop-specific memory modules; desktop DDR4 DIMM modules are physically incompatible and cannot be installed, even if electrical specifications match.
  • Reaching 64 GB total capacity requires 2x 32 GB SO-DIMM modules; single-module configurations limit practical upgrade ceiling to 32 GB without replacing both existing memory banks.
  • Memory bandwidth at 3200 MHz with 2 channels delivers approximately 51 GB/s theoretical throughput; this may represent a constraint in GPU-accelerated workloads when paired with discrete graphics architecture common in this model generation.
  • SO-DIMM modules occupy minimal physical space; no clearance conflicts or thermal management considerations typically restrict memory installation, distinguishing this from desktop systems requiring heatsink clearance verification.
  • Warranty coverage for aftermarket memory replacements varies by manufacturer policy; installing non-OEM modules may void memory-specific coverage unless the system documentation explicitly permits third-party DDR4 upgrades.