ACER Aspire A515-45-R9Y5 RAM upgrade specifications

ACER A515-45-R9Y5 ACER A515-45-R9Y5 ACER A515-45-R9Y5 ACER A515-45-R9Y5 ACER A515-45-R9Y5

The Acer Aspire 5 series model A515-45-R9Y5 supports DDR4-SDRAM memory upgrades with a maximum RAM capacity of 24 GB. The laptop features one SO-DIMM slot for memory expansion, compatible with DDR4 modules operating at 2133 MHz frequency. The specifications indicate an on-board memory configuration combined with one replaceable SO-DIMM slot, allowing users to upgrade the existing memory configuration to meet higher performance requirements.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorOn-board + SO-DIMM
Memory typeDDR4-SDRAM
Frequency2133 MHz
Maximum RAM24 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2133 (PC4-17064)
Bandwidth17.1 GB/s
Laptop Release date04 March 2021

Additional Notes

  • The Acer Aspire A515-45-R9Y5 combines soldered memory with a single accessible slot, meaning upgrade capacity is constrained to 24 GB total rather than expandable beyond that ceiling. The onboard portion cannot be replaced, only supplemented.
  • DDR4-3200 modules will function in this system but will downclock to 2133 MHz, eliminating any performance gain from higher-frequency RAM. Purchasing faster memory provides no benefit and represents wasted expenditure.
  • SO-DIMM modules are physically smaller than standard laptop memory and incompatible with desktop systems. Removed modules from this unit cannot be repurposed in conventional desktop builds without external adapters that compromise stability.
  • The single accessible slot creates a memory configuration limitation: users cannot achieve symmetrical dual-channel operation. Bandwidth remains constrained to single-channel pathways, reducing memory throughput compared to systems with paired slots.
  • Warranty preservation requires using memory modules rated for 2133 MHz operation. Substituting faster-rated modules, while mechanetically compatible, may trigger support denial if hardware failure occurs, as incompatible specifications breach manufacturer specifications.
  • Installation of the maximum 24 GB upgrade requires removing existing SO-DIMM hardware and replacing it entirely. The soldered portion (typically 4-8 GB) remains permanent, reducing the effective upgrade margin to approximately 16 GB of user-installable capacity.