ACER Aspire A515-45-R42F RAM upgrade specifications

ACER A515-45-R42F ACER A515-45-R42F ACER A515-45-R42F ACER A515-45-R42F ACER A515-45-R42F

ACER Aspire Series 5 model A515-45-R42F supports DDR4-SDRAM memory upgrade specifications. The laptop contains one SO-DIMM slot for RAM expansion, with maximum memory capacity of 24 GB. Compatible memory modules operate at 2133 MHz frequency. The system features on-board memory combined with one SO-DIMM slot configuration, allowing users to upgrade the existing memory capacity. Specifications indicate the A515-45-R42F upgrade slots accommodate standard SO-DIMM form factor DDR4 modules to reach maximum memory configurations.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorOn-board + SO-DIMM
Memory typeDDR4-SDRAM
Frequency2133 MHz
Maximum RAM24 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2133 (PC4-17064)
Bandwidth17.1 GB/s
Laptop Release date28 September 2021

Additional Notes

  • The onboard memory cannot be removed or replaced, limiting upgrade flexibility to the single SO-DIMM slot available in the ACER Aspire A515-45-R42F.
  • The 24 GB maximum capacity indicates 8 GB is soldered to the motherboard, allowing a single 16 GB module installation to reach the system limit.
  • Dual-channel operation requires the SO-DIMM module to match the onboard memory's specifications, as mismatched configurations will default to single-channel mode with reduced memory bandwidth.
  • The 2133 MHz frequency represents the effective data rate, meaning modules rated at higher speeds will downclock to this specification when installed.
  • Installing DDR4 modules rated above 2133 MHz will not damage the system but provides no performance benefit, as the memory controller enforces the lower frequency ceiling.
  • SO-DIMM modules with different voltage specifications than the onboard memory may cause boot failures or stability issues despite matching capacity and speed ratings.
  • The combination of onboard and slotted memory creates an asymmetric configuration that may impact performance in memory-intensive workloads compared to symmetric dual-channel setups.
  • Physical access to the SO-DIMM slot typically requires bottom panel removal, which may void warranty if manufacturer seals are broken during the process.
  • Memory errors or failures affecting the onboard component cannot be resolved through module replacement and would require motherboard-level service.
  • The maximum 24 GB configuration limits professional applications requiring 32 GB or more, establishing a hard ceiling for workload scalability.