ASUS ProArt StudioBook W700G3T-AV077R RAM upgrade specifications
ASUS ProArt StudioBook Pro 17 W700G3T-AV077R features DDR4-SDRAM memory upgrade specifications with 2x SO-DIMM slots supporting maximum capacity of 64 GB RAM. Compatible memory operates at 2666 MHz frequency. Upgrade slots accommodate SO-DIMM form factor modules. Specifications enable memory expansion for enhanced multitasking performance on mobile workstation platform.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 07 January 2020 |
Additional Notes
- The dual channel architecture requires symmetrical module pairs to maintain peak memory bandwidth for rendering tasks.
- Physical access to the memory slots inside the ASUS ProArt StudioBook W700G3T-AV077R requires a specialized screwdriver for the base panel and involves navigating internal ribbon cables.
- Installing modules with frequencies higher than 2666 MHz results in automatic downclocking due to firmware limitations on the memory controller.
- The 64 GB limit restricts the maximum density per slot to 32 GB modules using a non ECC configuration.
- Latency variations between different brands of SO-DIMM modules can trigger system instability if timings are not matched during an upgrade.
- Thermal management depends on the clearance between the memory chips and the internal heat shielding when using thick double sided modules.
- The utilization of the 2 slots for a maximum capacity prevents further expansion without discarding existing hardware.