ASUS ROG G513QR-HF118T RAM upgrade specifications
ASUS ROG Strix G15 model G513QR-HF118T supports memory upgrades via two SO-DIMM slots. The laptop is compatible with DDR4-SDRAM memory operating at 3200 MHz frequency. Maximum RAM capacity reaches 32 GB total. Specifications indicate SO-DIMM form factor modules are required for upgrade compatibility. Current memory configuration and upgrade options depend on factory-installed capacity, with available slots allowing modular expansion to achieve maximum specified capacity limits.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 26 January 2021 |
Additional Notes
- The ASUS ROG G513QR-HF118T contains 2 SO-DIMM slots operating at 3200 MHz, which means both slots must be populated simultaneously to achieve dual-channel memory configuration and optimal bandwidth delivery to the processor.
- DDR4-3200 memory operates within standard JEDEC specifications, but mixing modules of different frequencies or CAS latencies may force the system to downclock to the slowest module's rating, reducing effective throughput below the rated 3200 MHz.
- The 32 GB maximum capacity ceiling implies that upgrading beyond 16 GB per module will exceed the firmware's memory controller limits, making individual 32 GB SO-DIMMs incompatible despite theoretical physical fit.
- SO-DIMM physical constraints require accessing the base panel or keyboard area to reach the memory slots, which is a warranty-safe operation on this model but demands careful component handling to avoid disrupting thermal management pathways.
- Upgrading from factory-installed memory to higher-capacity modules requires matching the original timings and voltage specifications; DDR4 SO-DIMMs at non-standard voltages (above 1.2V nominal) may operate outside manufacturer validation parameters.
- The 2-slot architecture prevents incremental upgrades; adding a single module requires either replacement of existing memory or temporary removal, eliminating the option to retain original components during a partial memory expansion.