ASUS ROG G513RM-HQ003W RAM upgrade specifications
ASUS ROG Strix G15 G513RM-HQ003W RAM upgrade specifications include DDR5-SDRAM memory compatible with 2x SO-DIMM slots. Maximum memory capacity reaches 32 GB total. Compatible memory modules operate at 4800 MHz frequency. SO-DIMM form factor modules are required for upgrade compatibility with this gaming laptop model. Users requiring enhanced memory performance can install compatible DDR5 modules into available slots to maximize system RAM capacity.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 4800 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-4800 (PC5-38400) |
| Bandwidth | 38.4 GB/s |
| Laptop Release date | 07 February 2022 |
Additional Notes
- The ASUS ROG G513RM-HQ003W requires SO-DIMM modules specifically, meaning standard desktop DIMM memory will not physically fit into the slots.
- DDR5 modules are not backward compatible with DDR4 slots, and DDR4 modules cannot be installed in this system due to different notch positions and voltage requirements.
- The 32 GB maximum capacity constraint means installing 2 modules of 32 GB each will exceed the memory controller's addressing capability and prevent proper system operation.
- Mixing modules with different speeds will force all installed memory to operate at the frequency of the slowest module, potentially below 4800 MHz.
- Using unmatched modules from different manufacturers or with different timings may result in training failures during POST or system instability under load.
- Installing a single module will disable dual-channel mode, reducing memory bandwidth by approximately 50 percent compared to a matched pair configuration.
- DDR5 modules operating above 4800 MHz may require manual BIOS configuration to achieve advertised speeds, as JEDEC standard speed for DDR5 defaults to 4800 MHz.
- Both SO-DIMM slots must be accessible without removing permanently affixed components to maintain warranty coverage during user-installed upgrades.
- Modules exceeding standard SO-DIMM height specifications may interfere with the bottom panel closure or internal shielding.
- ECC SO-DIMM modules will typically be rejected by consumer-grade memory controllers unless explicitly supported in the chipset specification.
- The memory controller's training process at POST will add 2 to 5 seconds to boot time compared to DDR4 systems due to DDR5's increased complexity.