ASUS ROG G513RW-HF004W RAM upgrade specifications
ASUS ROG Strix G15 G513RW-HF004W laptop features DDR5-SDRAM memory upgradeable through 2x SO-DIMM slots, supporting maximum capacity of 32 GB total. Compatible memory modules operate at 4800 MHz frequency. Specifications indicate specifications for RAM upgrade configurations compatible with G513RW-HF004W model, enabling users to expand memory capacity within maximum supported parameters and compatible slot architecture.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 4800 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-4800 (PC5-38400) |
| Bandwidth | 38.4 GB/s |
| Laptop Release date | 28 November 2021 |
Additional Notes
- The dual-channel architecture requires matches in module density to ensure optimal memory controller synchronization and avoid performance degradation.
- The ASUS G513RW-HF004W utilizes a chipset that restricts total addressable memory to 32 GB, rendering higher capacity modules incompatible or result in boot failure.
- Integration of 4800 MHz DDR5 technology introduces on-die ECC and power management ICs directly on the RAM sticks, which increases thermal output near the SO-DIMM slots during heavy workloads.
- Physical access to both slots involves removing the bottom chassis panel, requiring careful handling of the internal battery connector to prevent short circuits during the installation of new modules.
- The system firmware will automatically downclock any installed memory modules that exceed the stated 4800 MHz frequency rating to maintain stability within the hardware voltage limits.
- Data transfer rates rely on the population of both SO-DIMM slots to achieve full bandwidth, as a single module configuration creates a significant bottleneck for the processor and integrated graphics.
- Lower latency timings on aftermarket memory may be overridden by the system BIOS if the SPD profiles do not match the factory-preset voltage parameters.