ASUS ROG G614JIR-N3087-GAMING RAM upgrade specifications

ASUS G614JIR-N3087-GAMING ASUS G614JIR-N3087-GAMING ASUS G614JIR-N3087-GAMING ASUS G614JIR-N3087-GAMING ASUS G614JIR-N3087-GAMING

ASUS ROG Strix G16 G614JIR-N3087-GAMING laptop memory upgrade specifications detail DDR5-SDRAM compatibility with 2x SO-DIMM slots supporting maximum RAM capacity of 32 GB total. Operating frequency rated at 5600 MHz. Compatible memory modules utilize SO-DIMM form factor for laptop installation. Upgrade specifications indicate available capacity expansion through dual memory slot configuration, with maximum supported memory allocation of 32 GB for enhanced system performance and multitasking capabilities.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR5-SDRAM
Frequency5600 MHz
Maximum RAM32 GB
Voltage1.1V
Number of pins262-pin
InterfacePC5
PC Speed RatingPC5-5600 (PC5-44800)
Bandwidth44.8 GB/s

Additional Notes

  • The ASUS ROG G614JIR-N3087-GAMING contains 2 SO-DIMM slots with a combined ceiling of 32 GB, meaning maximum capacity per module is 16 GB. Single-slot upgrades beyond 16 GB are not viable within the native architecture.
  • DDR5-5600 MHz operation depends on CPU and chipset validation of the specific frequency tier. Mixing older DDR5 modules rated below 5600 MHz with newer stock components may force downclocking across all installed modules to the lowest validated speed, resulting in reduced bandwidth efficiency across the entire memory subsystem.
  • SO-DIMM modules occupy physically compact space typical of mobile platforms. The 2-slot configuration means full capacity replacement requires removal of existing modules; there is no room for staged population. Both slots must be addressed simultaneously to avoid mismatched frequency negotiation.
  • Upgrading beyond the factory configuration to 32 GB (2x16 GB) requires purchasing modules rated specifically for DDR5-5600 and validated for the corresponding Intel or AMD mobile processor generation. Non-qualified modules may boot but operate at reduced speeds or exhibit instability under sustained load.
  • SO-DIMM replacement performed outside factory service typically remains within consumer warranty parameters if conducted without physical damage. Thermal paste or other component contact during installation may void coverage; module-only swaps carry minimal risk to warranty status.