ASUS ROG G713QR-K4048T-BE RAM upgrade specifications

ASUS G713QR-K4048T-BE ASUS G713QR-K4048T-BE ASUS G713QR-K4048T-BE ASUS G713QR-K4048T-BE ASUS G713QR-K4048T-BE

ASUS ROG Strix G17 G713QR-K4048T-BE laptop features two SO-DIMM slots supporting DDR4-SDRAM memory modules. Maximum RAM capacity reaches 32 GB total. Compatible upgrade specifications require DDR4 memory operating at 3200 MHz frequency. Memory upgrade options available through SO-DIMM form factor slots. Current configuration supports dual-channel memory architecture for enhanced performance. Specifications accommodate standard DDR4 laptop memory modules within maximum capacity limitations.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date07 October 2021

Additional Notes

  • Full utilization of the processor dual channel architecture requires the installation of 2 identical memory modules to prevent bandwidth throttling during high demand tasks.
  • The 32 GB threshold represents the firmware limit for addressing memory addresses, meaning modules exceeding 16 GB per slot will result in a failure to boot.
  • The **ASUS ROG G713QR-K4048T-BE** motherboard requires non ECC unbuffered modules to ensure system stability and avoid hardware conflicts with the integrated memory controller.
  • Upgrading memory requires the removal of the bottom chassis cover which may involve navigating internal ribbon cables for the integrated lighting zones.
  • Latency timings should match the existing factory configuration because the system lacks XMP support in the BIOS for manual voltage or timing adjustments.
  • Installation of memory with speeds exceeding 3200 MHz will result in automatic downclocking to the base frequency supported by the chipset.
  • Physical clearance within the SO-DIMM slots restricts upgrades to standard height modules without heat spreaders to prevent contact with the internal cooling assembly.