ASUS ROG G713QR-K4048 RAM upgrade specifications

ASUS G713QR-K4048 ASUS G713QR-K4048 ASUS G713QR-K4048 ASUS G713QR-K4048 ASUS G713QR-K4048

The ASUS ROG Strix G17 G713QR-K4048 gaming laptop features DDR4-SDRAM memory upgradeable through two SO-DIMM slots. Compatible RAM upgrades support a maximum capacity of 32 GB total memory at 3200 MHz frequency. Specifications indicate the SO-DIMM form factor memory modules are standard for this model. Users may upgrade existing memory by replacing or supplementing installed modules within the two available slots to achieve maximum supported capacity.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date14 September 2021

Additional Notes

  • The ASUS ROG G713QR-K4048 accepts only DDR4 modules, excluding compatibility with DDR5 or older DDR3 standards regardless of physical fit attempts.
  • The 3200 MHz specification represents the maximum officially supported speed, meaning modules rated at 3600 MHz or higher will likely downclock to 3200 MHz during operation.
  • The 32 GB ceiling distributes as either 2x16 GB dual-channel configuration or a single 32 GB module in single-channel mode, with the former delivering superior memory bandwidth for CPU-intensive applications.
  • SO-DIMM form factor physically differs from standard DIMM desktop modules through reduced pin count and physical length, preventing cross-compatibility between laptop and desktop memory.
  • Mixing modules with different CAS latencies or timings may force both modules to operate at the slower timing specification, potentially degrading performance below the rated speed of the faster module.
  • The 2-slot limitation prevents incremental upgrades beyond the initial configuration without removing existing modules, requiring full replacement when expanding from populated dual-channel configurations.
  • Accessing both slots typically requires bottom panel removal, though exact disassembly procedures depend on whether ASUS positioned both slots on a single side of the motherboard or distributed them across separate access points.
  • Non-standard voltage modules (low-voltage 1.2V or high-performance 1.5V variants) may cause POST failures or stability issues if the system firmware expects standard 1.2V DDR4 SO-DIMM voltage specifications.
  • Third-party RAM installation generally preserves manufacturer warranty coverage under right-to-repair regulations, though verifying regional warranty terms prevents disputes over user-serviceable component modifications.
  • Dual-rank modules potentially deliver marginal performance gains over single-rank equivalents at identical capacity and speed, though compatibility depends on the AMD Ryzen chipset's memory controller configuration.