ASUS ROG G713QR-K4038T RAM upgrade specifications

The ASUS ROG Strix G17 G713QR-K4038T features DDR4-SDRAM memory with 2x SO-DIMM slots for upgrade capacity. The laptop supports maximum RAM specifications of 32 GB total, with compatible memory operating at 3200 MHz frequency. Upgrade configurations allow installation of additional SO-DIMM modules to achieve maximum capacity specifications. The G713QR-K4038T memory slots accommodate standard SO-DIMM form factor DDR4 modules, enabling RAM expansion for enhanced multitasking performance.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date16 December 2020

Additional Notes

  • The ASUS ROG G713QR-K4038T operates with DDR4 memory exclusively, which constrains upgrade options to DDR4-compatible modules only. DDR5 memory is incompatible and will not function or POST in this system.
  • Two SO-DIMM slots represent a fixed architecture with no expansion beyond the 32 GB ceiling. Both slots must remain populated to achieve maximum capacity; single-slot configurations reduce usable memory by 50 percent.
  • The 3200 MHz frequency specification establishes the baseline operating speed for stable memory timing. Modules rated below this speed will operate at reduced efficiency, while higher-frequency modules will downclock to 3200 MHz and negate any performance premium from their rated specifications.
  • SO-DIMM form factor restricts upgrades to laptop-specific memory modules. Standard UDIMM desktop memory cannot physically install and will cause hardware incompatibility if insertion is forced.
  • Matched pairs of identical capacity modules minimize latency asymmetry and maximize memory bandwidth utilization. Mismatched capacities or specifications between the 2 slots may reduce dual-channel performance gains.
  • Memory warranty coverage typically remains valid when replacement modules match the original equipment manufacturer specifications for speed, voltage, and timing parameters. Non-standard configurations may void coverage from the original equipment manufacturer.