ASUS ROG G713RS-KH004 RAM upgrade specifications

ASUS G713RS-KH004 ASUS G713RS-KH004 ASUS G713RS-KH004 ASUS G713RS-KH004 ASUS G713RS-KH004

ASUS ROG Strix G17 G713RS-KH004 laptop supports DDR5-SDRAM memory upgrades via 2x SO-DIMM slots. Maximum RAM capacity reaches 32 GB, with compatible modules operating at 3200 MHz frequency. The SO-DIMM form factor specifications enable memory expansion for enhanced multitasking and performance capabilities. Upgrade options allow users to install compatible DDR5 memory modules within the specified slots to reach maximum supported capacity. Current memory specifications and upgrade potential accommodate demanding computing requirements for gaming and professional applications.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR5-SDRAM
Frequency3200 MHz
Maximum RAM32 GB
Voltage1.1V
Number of pins262-pin
InterfacePC5
PC Speed RatingPC5-3200 (PC5-25600)
Bandwidth25.6 GB/s
Laptop Release date28 August 2022

Additional Notes

  • The absence of soldered memory on the motherboard allows for symmetrical dual channel configurations provided that identical modules occupy both slots.
  • Operating at 3200 MHz on a DDR5 platform suggests the hardware functions at the baseline JEDEC frequency which minimizes heat generation during sustained workloads.
  • The 32 GB ceiling indicates a firmware limitation or a specific density cap per slot that prevents the utilization of high capacity 32 GB or 48 GB modules common in newer revisions.
  • Standard SO DIMM architecture ensures compatibility with third party memory vendors as long as the voltage requirements of the DDR5 standard are met.
  • Physical access to the internal components of the ASUS ROG G713RS-KH004 necessitates the careful removal of the bottom chassis panel and the disconnection of any LED ribbon cables attached to the light bar to avoid electrical shorts.
  • Integrated memory controllers in the host processor will automatically downclock any higher rated modules to the system maximum of 3200 MHz resulting in wasted bandwidth potential if 4800 MHz or 5600 MHz sticks are installed.
  • Populating both slots is required to achieve the full bit width of the memory bus which is critical for reducing bottlenecks in memory intensive rendering and gaming applications.