ASUS ROG G814PM-S8021 RAM upgrade specifications
ASUS ROG Strix G18 G814PM-S8021 laptop memory upgrade specifications include DDR5-SDRAM compatibility with maximum RAM capacity of 64 GB. The gaming notebook features 2x SO-DIMM slots for memory expansion, supporting DDR5-5600 MHz frequency. Compatible RAM upgrades must utilize SO-DIMM form factor modules to ensure proper installation and optimal performance within the specifications outlined for this model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 5600 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-5600 (PC5-44800) |
| Bandwidth | 44.8 GB/s |
Additional Notes
- The presence of 2 SO-DIMM slots implies that reaching the 64 GB maximum requires removing any existing pre-installed modules since no soldered memory chips occupy the motherboard space.
- Utilizing a dual-channel configuration in the ASUS ROG G814PM-S8021 significantly increases memory bandwidth for CPU-bound tasks compared to single-slot populations.
- Installation of modules with higher rated frequencies than 5600 MHz results in automatic downclocking to match the internal memory controller limitations of the chipset.
- The DDR5 architecture incorporates on-die ECC and power management integrated circuits which shift voltage regulation responsibilities from the motherboard directly to the RAM modules.
- Upgrading to the maximum supported density involves 32 GB modules which may increase thermal output within the SODIMM area during sustained high-load operations.
- Physical access to the memory slots requires the removal of the bottom chassis cover which necessitates the use of non-marring tools to avoid damaging the internal plastic clips or ribbon cables.
- Mixing RAM modules with different timings or ranks can cause the system to default to the slowest common latency profile or lead to boot instability due to training failures.