ASUS ROG G733QS-HG056T RAM upgrade specifications
ASUS ROG Strix SCAR 17 G733QS-HG056T laptop memory upgrade specifications include DDR4-SDRAM compatible modules in SO-DIMM form factor. The system features two memory slots supporting maximum RAM capacity of 64 GB total. Upgrade modules operate at 3200 MHz frequency. Compatible memory modules must match DDR4-SDRAM specifications and SO-DIMM form factor for proper installation in available slots.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 28 December 2020 |
Additional Notes
- The ASUS ROG G733QS-HG056T accepts only SO-DIMM modules, preventing installation of standard desktop DIMM memory despite identical DDR4 specifications.
- The 3200 MHz frequency represents the maximum supported speed, meaning faster modules will automatically downclock to this ceiling regardless of their rated specifications.
- Dual-channel architecture requires matched pairs for optimal memory bandwidth, as mismatched capacities or timings force operation in single-channel or asymmetric modes.
- The 64 GB maximum capacity limits each slot to 32 GB modules, as no current consumer SO-DIMM standard supports higher individual module densities.
- DDR4 voltage compatibility restricts upgrades to standard 1.2V modules, as higher-voltage variants designed for overclocking may cause stability issues or fail POST.
- JEDEC-standard modules ensure compatibility, while XMP-profiled modules may require BIOS configuration or default to base speeds without manual intervention.
- Physical SO-DIMM dimensions measure 67.6 mm in length compared to 133.35 mm desktop modules, making standard laptop memory physically incompatible with desktop slots.
- Warranty preservation typically requires avoiding damage to retention clips during installation, as bent or broken clips constitute physical damage outside covered defects.
- The 2-slot configuration means capacity upgrades require complete replacement of existing modules rather than simple addition when both slots are occupied.
- CAS latency variations between installed and new modules may cause the memory controller to adopt the slowest timing across all modules, potentially degrading performance.