ASUS ROG G834JYR-N6100-GAMING RAM upgrade specifications
ASUS ROG Strix SCAR 18 G834JYR-N6100-GAMING gaming laptop features DDR5-SDRAM memory upgrade specifications. The system includes two SO-DIMM slots supporting maximum RAM capacity of 64 GB total. Compatible memory modules operate at 5600 MHz frequency. Upgrade options enable expansion from the factory configuration to the maximum 64 GB capacity using DDR5 SO-DIMM compatible modules matching the specified frequency and form factor specifications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 5600 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-5600 (PC5-44800) |
| Bandwidth | 44.8 GB/s |
Additional Notes
- The dual-channel architecture requires paired modules to achieve the peak theoretical bandwidth necessary for heavy computational tasks.
- The presence of 2 SO-DIMM slots implies that reaching the maximum capacity requires the removal of existing modules rather than simple addition.
- Operating at 5600 MHz demands high-grade signal integrity which is sensitive to mixing brands or differing CAS latencies between the two slots.
- System stability on the ASUS ROG G834JYR-N6100-GAMING relies on modules containing integrated Power Management Integrated Circuits to regulate voltage locally on the stick.
- Thermal dissipation from high-density 32 GB modules may impact secondary storage temperatures due to the proximity of memory banks to NVMe slots.
- Upgrading beyond the 64 GB threshold is restricted by the motherboard firmware despite potential hardware processor support for higher capacities.
- Synchronous operation at the rated frequency depends on the installation of memory kits with matching XMP or EXPO profiles to avoid downclocking to base JEDEC speeds.
- Internal hardware access for memory replacement is granted through the bottom chassis panel where specific screw lengths must be maintained to avoid motherboard punctures.