ASUS ROG GX650RW-LS102W RAM upgrade specifications
The ASUS ROG Zephyrus Duo 16 GX650RW-LS102W features DDR5-SDRAM memory upgrade specifications with 2x SO-DIMM slots. Maximum RAM capacity reaches 64 GB, supporting DDR5-4800 MHz frequency. Compatible memory modules utilize the SO-DIMM form factor for this laptop model. Specifications indicate expandable memory configuration for enhanced multitasking and performance capabilities.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 4800 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-4800 (PC5-38400) |
| Bandwidth | 38.4 GB/s |
| Laptop Release date | 22 April 2022 |
Additional Notes
- The ASUS ROG GX650RW-LS102W contains 2 SO-DIMM slots, meaning RAM upgrades require replacing existing modules rather than adding to unused slots, necessitating either temporary storage of the original modules or their repurposing.
- DDR5-4800 memory operates at higher latency cycles compared to DDR4 equivalents, creating potential CPU-memory bandwidth saturation during mixed workloads; upgrading capacity without verifying JEDEC profile compatibility risks system instability if non-standard timing parameters are applied.
- The 64 GB maximum capacity ceiling means individual SO-DIMM modules must reach 32 GB each; availability of 32 GB SO-DIMM DDR5-4800 units remains limited in retail channels, potentially delaying upgrade completion timelines.
- SO-DIMM modules generate measurable heat during sustained loads; adding higher-capacity memory increases thermal output in a confined chassis volume, which may require monitoring of internal temperatures if system cooling was previously marginal.
- Warranty coverage typically remains intact for RAM upgrades performed by end-users on this platform, provided modules meet JEDEC DDR5 specifications and installation does not involve chassis modifications.
- DDR5-4800 frequency requires matching the laptop's memory controller firmware level; BIOS updates addressing memory compatibility have been issued post-launch, and upgrading without a current BIOS revision may trigger compatibility failures.