ASUS ROG GX703HS-KF006T RAM upgrade specifications

ASUS GX703HS-KF006T ASUS GX703HS-KF006T ASUS GX703HS-KF006T ASUS GX703HS-KF006T ASUS GX703HS-KF006T

ASUS ROG Zephyrus S17 GX703HS-KF006T features DDR4-SDRAM memory upgrade specifications. The laptop contains one SO-DIMM slot compatible with DDR4 memory modules operating at 3200 MHz frequency. Maximum RAM capacity reaches 48 GB through the expandable slot, supplemented by on-board memory configuration. Specifications enable memory upgrades to enhance multitasking and performance capabilities within the gaming laptop's architecture.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorOn-board + SO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM48 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date17 September 2021

Additional Notes

  • The hardware architecture utilizes a hybrid memory configuration combining 16 GB of permanently soldered memory with a single expansion slot to reach the stated maximum capacity.
  • Dual channel performance benefits only apply to the capacity matched between the on board chips and the installed module in the ASUS ROG GX703HS-KF006T, while the remaining address space operates in single channel mode.
  • Upgrading requires a 32 GB SO-DIMM module to hit the ceiling since the secondary slot is the only available path for memory expansion.
  • Installing modules with timings slower than CL22 or frequencies lower than 3200 MHz will force the soldered memory to downclock, resulting in a system wide decrease in memory bandwidth.
  • The asymmetrical memory distribution can lead to inconsistent frame pacing in memory intensive gaming applications once the initial 32 GB of synchronous bandwidth is exceeded.
  • A single slot design prevents the replacement of the primary 16 GB bank, meaning a total motherboard failure or memory defect in the soldered section renders the system unbootable regardless of the SO-DIMM state.
  • Physical installation is limited to standard 260 pin DDR4 SO-DIMM hardware, as the voltage requirements and pin configuration are incompatible with DDR5 or LPDDR modules.