ASUS TUF Dash FX516PR-AZ019T-BE RAM upgrade specifications
The ASUS TUF Dash F15 FX516PR-AZ019T-BE laptop features DDR4-SDRAM memory configuration with one SO-DIMM upgrade slot available. The system supports maximum RAM capacity of 32 GB through compatible DDR4 modules operating at 3200 MHz frequency. Memory specifications include on-board soldered RAM plus one expandable SO-DIMM slot for upgrade purposes. Compatible upgrades require DDR4-SDRAM modules matching the 3200 MHz specifications to ensure proper operation and system compatibility.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | On-board + SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 19 December 2020 |
Additional Notes
- The ASUS TUF Dash FX516PR-AZ019T-BE contains soldered on-board memory that cannot be removed, meaning only the single SO-DIMM slot remains available for capacity expansion.
- Adding a 32 GB SO-DIMM module will create asymmetrical memory configuration, which may cause marginal latency increases due to unmatched DIMM capacities operating in single-channel mode on the empty slot.
- DDR4-3200 MHz frequency support limits upgrade options to current-generation SO-DIMM modules; future DDR5 memory remains physically incompatible with this motherboard design.
- The single SO-DIMM slot design prevents dual-channel memory operation regardless of total capacity installed, constraining bandwidth available to the processor and discrete GPU during memory-intensive workloads.
- Installing a 32 GB SO-DIMM to reach the 32 GB maximum requires the module to handle the full memory load alone, as the on-board portion remains fixed and cannot be supplemented simultaneously in practical upgrade scenarios.
- SO-DIMM form factor requires low-profile or standard-height modules only; full-height memory variants will create physical interference with internal components and prevent proper device closure.
- JEDEC DDR4-3200 compliance ensures compatibility with consumer-grade SO-DIMM modules, but over-clocked XMP/DOCP profiles may require manual timing adjustments to remain stable on this single-slot configuration.
- Warranty validity for memory upgrades depends on ASUS service policy; third-party SO-DIMM installation typically falls outside covered hardware defects unless performed by authorized service centers.