ASUS TUF Gaming FA506IU-BQ009 RAM upgrade specifications
ASUS TUF Gaming A15 series model FA506IU-BQ009 supports DDR4-SDRAM memory upgrades with two SO-DIMM slots. Maximum RAM capacity reaches 32 GB total. Memory specifications include 3200 MHz frequency operation and SO-DIMM form factor compatibility. Upgrade slots accommodate standard DDR4 modules for enhanced system performance and multitasking capabilities.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 04 June 2020 |
Additional Notes
- The ASUS TUF Gaming FA506IU-BQ009 supports dual-channel memory architecture through its 2 SO-DIMM slots, enabling doubled bandwidth compared to single-channel configurations when matching modules are installed.
- Maximum supported capacity of 32 GB indicates a 16 GB per-slot limitation imposed by the chipset or BIOS, preventing use of higher-density 32 GB modules even if physically compatible.
- DDR4-3200 represents the official JEDEC specification, though actual performance depends on whether the processor memory controller supports this speed natively or requires XMP/DOCP profiles.
- SO-DIMM form factor compatibility restricts upgrades to laptop-specific modules measuring 67.6 mm in length, incompatible with standard desktop DIMM modules despite sharing DDR4 technology.
- Both memory slots require simultaneous access from the bottom panel or keyboard deck removal, as TUF Gaming chassis designs typically lack dedicated RAM access doors.
- Mixing modules with different speeds will force all installed memory to operate at the lowest common frequency, potentially underutilizing faster modules paired with slower original equipment.
- Upgrading to the maximum 32 GB capacity necessitates replacing any pre-installed modules rather than supplementing them, as only 2 physical slots are available for expansion.
- DDR4-3200 modules operating below their rated speed due to processor limitations will still function but deliver reduced bandwidth compared to systems with full-speed memory controller support.
- Warranty preservation requires avoiding excessive force during installation, as SO-DIMM slots use side-mounted retention clips that can fracture if modules are inserted at incorrect angles.
- Single-rank versus dual-rank module architecture affects performance independently of capacity, with dual-rank configurations sometimes providing marginal bandwidth improvements in specific workloads.