ASUS TUF Gaming FA506IV-HN963 RAM upgrade specifications
ASUS TUF Gaming A15 FA506IV-HN963 laptop memory upgrade specifications indicate DDR4-SDRAM compatibility with two SO-DIMM slots supporting maximum RAM capacity of 32 GB total. Memory modules operate at 3200 MHz frequency. SO-DIMM form factor specifications apply to all compatible RAM upgrades. Maximum capacity configuration achievable through dual-slot population with appropriate DDR4 modules meeting frequency and form factor requirements for this gaming laptop series.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 13 January 2021 |
Additional Notes
- Dual channel memory architecture requires matching module capacities and timings across both slots to maximize memory controller throughput.
- The absence of soldered memory on the ASUS TUF Gaming FA506IV-HN963 motherboard allows for the replacement of both factory modules if lower latency timings are desired.
- Installation of memory modules exceeding the 3200 MHz frequency will result in automatic downclocking to the processor maximum supported speed.
- Upgrading beyond 32 GB might lead to system instability or boot failures as the BIOS firmware is not validated for higher densities.
- The SO-DIMM form factor necessitates 260 pin modules which are physically incompatible with desktop DIMM or newer DDR5 slots.
- The 2 slot configuration creates a hard threshold for future expansion meaning 16 GB modules must be used in each slot to reach the hardware ceiling.
- Memory latency impacts the communication speed between the CPU and the GPU especially in integrated graphics scenarios where system RAM is shared.