ASUS TUF Gaming FA507NU-LP031W RAM upgrade specifications
The ASUS TUF Gaming A15 FA507NU-LP031W features two SO-DIMM slots supporting DDR5-SDRAM memory modules. The laptop accommodates a maximum RAM capacity of 32 GB total, with compatible memory operating at 4800 MHz frequency. The upgrade specifications indicate support for DDR5 technology in the SO-DIMM form factor, enabling users to expand memory capacity by replacing or supplementing existing modules within the dual-slot configuration. Maximum supported capacity per slot is 16 GB, providing flexible upgrade pathways for enhanced multitasking and application performance.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 4800 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-4800 (PC5-38400) |
| Bandwidth | 38.4 GB/s |
Additional Notes
- Dual channel memory architecture requires populated pairs of modules to achieve maximum data transfer rates and avoid artificial bandwidth caps during gaming or rendering.
- The 32 GB capacity limit indicates a motherboard firmware restriction that prevents the utilization of 32 GB or 64 GB single sticks despite the processor architecture potentially supporting higher densities.
- Installation of memory modules with frequencies exceeding 4800 MHz results in automatic downclocking to the system bus limit as defined by the BIOS of the ASUS TUF Gaming FA507NU-LP031W.
- Storage of internal components necessitates the removal of the bottom chassis panel which exposes the hardware to electrostatic discharge risks during the physical swap of SO-DIMM modules.
- Upgrading to the maximum supported capacity fills both available slots and eliminates future expansion overhead without discarding existing modules.
- The shift to DDR5 technology improves power efficiency at the hardware level compared to older standards due to on-module power management integrated circuits.
- Latency performance is tied to the JEDEC standard timings of the installed kits since mobile gaming platforms typically lack XMP or manual timing adjustment in the BIOS.