ASUS TUF Gaming FA507NV-LP103 RAM upgrade specifications
ASUS TUF Gaming A15 series model FA507NV-LP103 features two SO-DIMM slots supporting DDR5-SDRAM memory modules. The laptop accommodates a maximum RAM capacity of 32 GB through compatible upgrades. Memory specifications include DDR5 technology operating at 4800 MHz frequency. Current upgrade slots allow installation of additional or replacement memory modules to enhance system performance. Supported DDR5-SDRAM modules must match the SO-DIMM form factor and frequency specifications for compatibility with the FA507NV-LP103 configuration.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 4800 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-4800 (PC5-38400) |
| Bandwidth | 38.4 GB/s |
Additional Notes
- The presence of 2 SO-DIMM slots allows for dual-channel memory configurations which doubles the theoretical bandwidth compared to single-channel setups.
- The 32 GB maximum capacity indicates a firmware limitation or a validated threshold that prevents the use of 32 GB high-density modules in both slots simultaneously.
- Operating at a 4800 MHz frequency provides the high data transfer rates necessary to prevent CPU bottlenecks during memory-intensive processing tasks on the ASUS TUF Gaming FA507NV-LP103.
- Internal layout constraints require the use of standard height SO-DIMM modules to ensure the bottom chassis panel closes without applying pressure to the motherboard.
- Standard DDR5 architecture integrates on-die ECC and local power management integrated circuits which reduces the voltage regulation burden on the laptop mainboard.
- Total memory replacements are required for capacity increases because the system lacks soldered memory chips that would otherwise serve as a permanent base.
- Future latency improvements are restricted to the 4800 MHz JEDEC standard as the platform does not support XMP or DOCP overclocking profiles for higher speed memory kits.