ASUS TUF Gaming FX506HE-HN003 RAM upgrade specifications
ASUS TUF Gaming F15 FX506HE-HN003 supports DDR4-SDRAM memory upgrades with two SO-DIMM slots. Maximum RAM capacity reaches 32 GB total. Compatible memory operates at 3200 MHz frequency specifications. Upgrade options accommodate SO-DIMM form factor modules. Memory slots allow dual-channel configuration for compatible DDR4 modules meeting specifications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 28 March 2022 |
Additional Notes
- The ASUS TUF Gaming FX506HE-HN003 accepts only DDR4 modules, preventing installation of DDR3 or DDR5 memory regardless of physical compatibility.
- The 32 GB maximum capacity limits configurations to either 2x16 GB modules or asymmetric combinations totaling 32 GB or less.
- Both SO-DIMM slots support 3200 MHz operation, enabling dual-channel bandwidth of 51.2 GB/s when populated with matched modules.
- Mixing modules with different frequencies will force all memory to operate at the speed of the slowest module installed.
- Single-channel configuration occurs when only 1 slot is populated, reducing memory bandwidth by approximately 50% compared to dual-channel operation.
- Non-matching module capacities between slots maintain dual-channel mode only for the capacity present in both channels, with excess capacity reverting to single-channel mode.
- Standard SO-DIMM height specifications eliminate physical clearance concerns within the laptop chassis during installation.
- Memory replacement typically requires bottom panel removal, with access varying by specific chassis design and warranty seal placement.
- Modules rated below 3200 MHz will function but sacrifice available bandwidth, while modules rated above 3200 MHz will downclock to the supported frequency.
- ECC SO-DIMM modules are incompatible with consumer laptop chipsets despite matching the DDR4 SO-DIMM form factor.
- Voltage requirements default to 1.2V for DDR4 operation, with XMP profiles unsupported in most laptop BIOS implementations.