ASUS TUF Gaming FX507ZC4-HN176 RAM upgrade specifications

ASUS FX507ZC4-HN176 ASUS FX507ZC4-HN176 ASUS FX507ZC4-HN176 ASUS FX507ZC4-HN176 ASUS FX507ZC4-HN176

ASUS TUF Gaming F15 model FX507ZC4-HN176 supports DDR4-SDRAM memory upgrades via 2x SO-DIMM slots. Maximum compatible RAM capacity reaches 32 GB total. Memory specifications include 3200 MHz frequency and SO-DIMM form factor. Upgrade configurations allow installation of compatible DDR4 modules to enhance system performance. Existing slots accommodate standard notebook memory modules meeting specifications for this laptop model.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s

Additional Notes

  • The ASUS TUF Gaming FX507ZC4-HN176 uses laptop-class SO-DIMM slots rather than desktop DIMM, restricting upgrade components to mobile memory modules and preventing use of standard desktop RAM.
  • DDR4-3200 operation establishes a performance ceiling; installing faster DDR4 modules (3600 MHz or above) will downclock to 3200 MHz, eliminating any speed advantage from premium memory purchases.
  • 2 SO-DIMM slots with a 32 GB maximum capacity means each slot accepts 16 GB modules at most; asymmetrical configurations (1x16 GB + 1x8 GB) function but operate in single-channel mode on the unpopulated slot, reducing bandwidth by approximately 50 percent compared to dual-channel paired modules.
  • Total upgrade potential is fixed at 32 GB; applications or workloads exceeding this threshold cannot be accommodated through memory expansion, requiring alternative optimization strategies instead.
  • SO-DIMM modules occupy minimal physical space, but removal requires accessing the laptop base panel; reassembly must restore all fasteners and alignment to preserve structural rigidity and maintain warranty coverage during future service visits.
  • Timing specifications (CAS latency, refresh rates) for third-party DDR4-3200 SO-DIMM modules should match or remain tighter than factory specifications to avoid boot failures or stability issues, though JEDEC standard compliance typically ensures compatibility.