ASUS Vivobook X412DA-EK340T RAM upgrade specifications
The ASUS Vivobook 14 Series X412DA-EK340T features DDR4-SDRAM memory specifications with upgrade capacity. The laptop contains 1x SO-DIMM slot compatible with DDR4 memory modules operating at 2400 MHz frequency. Maximum RAM capacity reaches 12 GB total, combining on-board memory with the expandable SO-DIMM slot. Memory upgrade options for the X412DA-EK340T are limited to single slot configuration, providing moderate expandability for users requiring enhanced performance specifications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | On-board + SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2400 MHz |
| Maximum RAM | 12 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2400 (PC4-19200) |
| Bandwidth | 19.2 GB/s |
| Laptop Release date | 17 October 2019 |
Additional Notes
- The ASUS Vivobook X412DA-EK340T features a hybrid memory architecture where part of the system RAM is soldered directly to the motherboard while a single SO-DIMM slot provides limited expansion capability.
- The 12 GB maximum capacity indicates that 4 GB is permanently soldered, leaving only 8 GB as the maximum installable module size in the accessible slot.
- Dual-channel memory operation requires matching the soldered memory specifications, meaning installing an 8 GB module will result in asymmetric configuration with only the first 4 GB of the module running in dual-channel mode alongside the soldered 4 GB.
- The 2400 MHz frequency represents the native JEDEC standard speed without XMP/overclocking support, as mobile platforms typically lock memory multipliers for thermal and stability reasons.
- Installing a module rated above 2400 MHz will function but downclock to match the system specification, offering no performance benefit over standard-speed modules.
- The single accessible SO-DIMM slot eliminates future expansion options once populated with the maximum 8 GB module, as no additional physical slots exist for further upgrades.
- DDR4 SO-DIMM modules operate at 1.2V standard voltage, and higher voltage variants designed for overclocking may trigger compatibility issues or refuse to boot in this platform.
- The soldered memory component cannot be removed or replaced without specialized BGA rework equipment, making any failure of the onboard memory a motherboard-level repair issue.
- Memory bandwidth is capped at 19.2 GB/s in dual-channel configuration when properly matched, dropping to approximately 9.6 GB/s if operating in single-channel mode due to mismatched capacities.
- SO-DIMM modules with heights exceeding standard 30mm profiles may encounter physical clearance issues with the bottom chassis cover or internal components in this thin-profile chassis design.