ASUS Vivobook X512FB-BQ220C RAM upgrade specifications
ASUS Vivobook Series 15 model X512FB-BQ220C supports DDR4-SDRAM memory upgrade specifications. The laptop contains one SO-DIMM slot for RAM expansion, with maximum compatible capacity of 12 GB. Memory operates at 2400 MHz frequency. The device features on-board memory configuration combined with one replaceable SO-DIMM slot, enabling users to upgrade the existing memory configuration to the maximum supported capacity of 12 GB total RAM.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | On-board + SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2400 MHz |
| Maximum RAM | 12 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2400 (PC4-19200) |
| Bandwidth | 19.2 GB/s |
| Laptop Release date | 15 October 2019 |
Additional Notes
- The ASUS Vivobook X512FB-BQ220C contains soldered on-board memory that cannot be removed, leaving only 1 expandable slot for DDR4 modules. This architectural constraint means total capacity is capped at 12 GB regardless of module density.
- The 2400 MHz frequency specification indicates this system predates DDR4-2666 and faster standards. Inserting higher-frequency modules will downclock to 2400 MHz, eliminating any performance gain from faster JEDEC standards.
- Upgrading to the 12 GB maximum requires a single 8 GB SO-DIMM module, as the on-board portion is non-upgradeable and likely fixed at 4 GB. Dual-module configurations are not possible due to slot limitation.
- SO-DIMM compatibility is the critical constraint for physical installation. Desktop DDR4 UDIMM modules cannot fit mechanically in the single available slot, making form factor verification mandatory before purchase.
- The memory subsystem will operate as single-channel if only 1 SO-DIMM is populated, resulting in approximately 10-15 percent bandwidth penalty compared to dual-channel configurations. The on-board memory cannot be paired for dual-channel operation.
- Warranty-safe upgrades require DDR4 SO-DIMM modules rated for 2400 MHz or lower. Modules with aggressive XMP/DOCP profiles present no risk since the BIOS lacks the ability to exceed 2400 MHz operation.