ASUS Vivobook N705FD-GC116T-BE RAM upgrade specifications

ASUS N705FD-GC116T-BE ASUS N705FD-GC116T-BE ASUS N705FD-GC116T-BE ASUS N705FD-GC116T-BE ASUS N705FD-GC116T-BE

ASUS Vivobook Pro N705FD-GC116T-BE laptop features DDR4-SDRAM memory upgrade specifications with 2x SO-DIMM slots supporting maximum capacity of 16 GB total RAM. Compatible memory modules operate at 2400 MHz frequency using SO-DIMM form factor. Upgrade configurations allow installation of matching DDR4 memory modules to enhance system performance specifications within maximum capacity limitations.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2400 MHz
Maximum RAM16 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2400 (PC4-19200)
Bandwidth19.2 GB/s
Laptop Release date05 December 2019

Additional Notes

  • The ASUS Vivobook N705FD-GC116T-BE contains 2 SO-DIMM slots, permitting maximum expansion to 16 GB total capacity. This dual-slot architecture means both modules must be replaced simultaneously to achieve the 16 GB ceiling, as single-slot upgrades cannot exceed the combined capacity of matching pairs.
  • DDR4-2400 MHz operation establishes a bandwidth constraint of approximately 19.2 GB/s per channel. Upgrading to higher-frequency DDR4 modules (3200 MHz or above) will not improve performance beyond the native 2400 MHz specification, as the memory controller locks frequency at the factory-configured rate.
  • SO-DIMM form factor necessitates laptop-specific memory modules rather than standard desktop DDR4 components. Purchasing full-size DIMM modules will result in physical incompatibility and installation failure, requiring warranty-safe sourcing from laptop-compatible suppliers.
  • The motherboard memory controller is locked to 2400 MHz operation. Attempting to force higher speeds through BIOS adjustment (if accessible) will either fail to POST or trigger automatic throttling back to the native frequency, making overclocking non-viable for memory performance gains.
  • Upgrading from the base configuration to 16 GB DDR4-2400 requires both SO-DIMM slots to be populated with 8 GB modules. Single 16 GB module installations are not viable, as the system lacks a third slot for asymmetrical configurations.