ASUS Vivobook S412FA-EK484T RAM upgrade specifications

ASUS S412FA-EK484T ASUS S412FA-EK484T ASUS S412FA-EK484T ASUS S412FA-EK484T ASUS S412FA-EK484T

ASUS Vivobook S14 S412FA-EK484T RAM upgrade specifications feature DDR4-SDRAM memory operating at 2400 MHz. The laptop contains one SO-DIMM slot available for upgrade, with maximum memory capacity of 12 GB. Memory configuration includes on-board memory plus one SO-DIMM slot for expansion. Compatible RAM modules must match DDR4-SDRAM specifications for proper operation and performance. Users seeking to upgrade memory on this model should install compatible DDR4 modules in the available slot to reach maximum supported capacity.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorOn-board + SO-DIMM
Memory typeDDR4-SDRAM
Frequency2400 MHz
Maximum RAM12 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2400 (PC4-19200)
Bandwidth19.2 GB/s
Laptop Release date05 November 2019

Additional Notes

  • The ASUS Vivobook S412FA-EK484T contains soldered on-board memory that cannot be removed, restricting total capacity expansion to the single SO-DIMM slot alone.
  • A single SO-DIMM upgrade to 8 GB would theoretically reach the 12 GB ceiling only if the soldered component totals 4 GB, making pre-upgrade capacity verification essential before purchasing replacement modules.
  • DDR4-2400 MHz operation creates a bandwidth constraint relative to modern DDR4-3200 standards; aftermarket SO-DIMMs rated for higher frequencies will downclock to 2400 MHz, eliminating performance gains from faster modules.
  • The SO-DIMM form factor limits compatible memory to laptop-grade modules; desktop DDR4 DIMMs are physically incompatible and will not seat in the slot.
  • Warranty coverage for memory upgrades typically remains valid when using manufacturer-approved SO-DIMMs, though installation should follow ASUS documentation to preserve coverage terms.
  • SO-DIMM accessibility requires partial disassembly of the base chassis; component fragility during removal and reinsertion presents moderate risk for electrostatic discharge damage if proper grounding procedures are not observed.
  • The single expandable slot leaves no redundancy; a defective SO-DIMM results in total loss of upgrade capacity and forces reliance on soldered memory alone.