ASUS Vivobook S412FA-EK485T RAM upgrade specifications

ASUS S412FA-EK485T ASUS S412FA-EK485T ASUS S412FA-EK485T ASUS S412FA-EK485T ASUS S412FA-EK485T

ASUS Vivobook S14 S412FA-EK485T RAM upgrade specifications include DDR4-SDRAM memory compatible with 1x SO-DIMM slot. The laptop features on-board memory combined with one upgradeable SO-DIMM slot, supporting maximum capacity of 12 GB total RAM. Memory operates at 2400 MHz frequency. Upgrade options allow expansion of installed memory through the single available SO-DIMM slot to reach maximum specifications for enhanced multitasking performance.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorOn-board + SO-DIMM
Memory typeDDR4-SDRAM
Frequency2400 MHz
Maximum RAM12 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2400 (PC4-19200)
Bandwidth19.2 GB/s
Laptop Release date03 January 2020

Additional Notes

  • The ASUS Vivobook S412FA-EK485T contains soldered memory on the motherboard, meaning only the single SO-DIMM slot is user-upgradeable; the on-board portion cannot be replaced or removed.
  • Maximum addressable memory caps at 12 GB total, establishing a hard ceiling regardless of SO-DIMM capacity; installing a 16 GB module will not yield additional usable capacity beyond this threshold.
  • DDR4-2400 MHz frequency is legacy-tier by current standards, creating a bandwidth ceiling of approximately 19.2 GB/s; pairing with a faster DDR4 module (3200 MHz or higher) will downclock the new module to 2400 MHz, negating speed advantages.
  • The single SO-DIMM slot architecture introduces a critical bottleneck: upgrading requires removal of any existing SO-DIMM, followed by reinstallation in the same slot; dual-channel memory configuration is not achievable.
  • Single-channel memory operation constrains system latency and bandwidth-dependent workloads, particularly in multitasking scenarios or data-intensive applications; this constraint persists regardless of total capacity installed.
  • SO-DIMM modules rated for DDR4-2400 or standard DDR4 operating voltages (1.2V) carry minimal incompatibility risk; however, modules with non-standard voltage specifications may trigger boot failures or automatic frequency reduction.
  • Warranty retention during SO-DIMM replacement is standard practice for this product line; opening the base panel to access the memory slot does not void coverage under normal circumstances.