ASUS Vivobook S412FA-EK489T RAM upgrade specifications

ASUS S412FA-EK489T ASUS S412FA-EK489T ASUS S412FA-EK489T ASUS S412FA-EK489T ASUS S412FA-EK489T

The ASUS Vivobook S14 S412FA-EK489T contains DDR4-SDRAM memory with one accessible SO-DIMM slot for upgrade capacity. The laptop features on-board memory combined with a single SO-DIMM slot configuration. Maximum compatible RAM capacity reaches 12 GB total. Memory specifications support DDR4-SDRAM operating at 2400 MHz frequency. Upgrade options allow expansion through the available SO-DIMM slot to reach the maximum memory specifications supported by the S412FA-EK489T model.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorOn-board + SO-DIMM
Memory typeDDR4-SDRAM
Frequency2400 MHz
Maximum RAM12 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2400 (PC4-19200)
Bandwidth19.2 GB/s
Laptop Release date05 November 2019

Additional Notes

  • The ASUS Vivobook S412FA-EK489T contains soldered on-board memory that cannot be removed, meaning only the single SO-DIMM slot remains available for expansion.
  • Maximum addressable memory of 12 GB indicates the on-board allocation is fixed at either 4 GB or 8 GB, leaving the SO-DIMM slot to accommodate the remainder up to the 12 GB ceiling.
  • DDR4-2400 MHz specification means replacement or additional SO-DIMM modules must match this frequency; installing faster DDR4 variants will downclock to 2400 MHz, while slower modules risk incompatibility or unstable operation.
  • Single SO-DIMM configuration eliminates dual-channel memory architecture benefits, resulting in reduced memory bandwidth compared to systems with 2 populated slots operating in parallel.
  • The soldered memory design, while common in ultraportable devices, prevents warranty-safe removal of defective on-board RAM; any memory malfunction affecting the soldered portion requires full motherboard replacement.
  • SO-DIMM form factor requires low-profile modules (typically 30 mm height); standard UDIMM desktop memory cannot be physically installed regardless of electrical compatibility.
  • Upgrade path is non-expandable beyond 12 GB total capacity; the single available slot cannot be populated with higher-capacity modules to exceed this threshold due to firmware limitations.