DELL Inspiron 5759 RAM upgrade specifications

The DELL Inspiron 5000 Series model 5759 features two SO-DIMM memory slots supporting DDR3L-SDRAM modules operating at 1600 MHz frequency. The laptop's maximum RAM capacity reaches 16 GB total. Compatible memory upgrades utilize the SO-DIMM form factor. Current specifications allow for expansion within the noted capacity limitations and slot configuration. Upgrade options must match the DDR3L-SDRAM memory type and frequency parameters for proper system compatibility and performance.

Additional Notes

• The presence of 2 physical slots requires removing existing modules to reach the maximum capacity since no memory is soldered to the mainboard.
• Operating at 1.35 volts is mandatory for the DELL Inspiron 5759 because standard 1.5 volt DDR3 modules will prevent the system from posting or may cause thermal instability.
• Dual channel mode activation depends on installing 2 identical capacity modules to double the available peak memory bandwidth.
• The memory controller enforces a hardware cap at 16 GB regardless of chipset capabilities or higher density sticks available on the market.
• Latency performance is locked to the 1600 MHz clock speed resulting in a maximum theoretical transfer rate of 12800 MB per second per channel.
• Accessing the SO-DIMM slots involves removing the base panel which exposes internal components to potential electrostatic discharge risks during installation.
• Installing modules with higher frequency ratings will result in automatic downclocking to match the hardcoded system bus speed.