DELL Inspiron 5767 RAM upgrade specifications
The Dell Inspiron 5000 Series 5767 laptop features DDR4-SDRAM memory with 2x SO-DIMM slots for RAM upgrades. Maximum supported capacity reaches 16 GB total, operating at 2400 MHz frequency. Compatible memory modules must utilize the SO-DIMM form factor. Current upgrade specifications allow users to expand memory capacity by replacing or adding DDR4 modules within the designated slots, subject to the 16 GB maximum RAM limitation. Memory compatibility requires DDR4-SDRAM type specifications matching the laptop's integrated memory controller requirements.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2400 MHz |
| Maximum RAM | 16 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2400 (PC4-19200) |
| Bandwidth | 19.2 GB/s |
| Laptop Release date | 03 September 2018 |
Additional Notes
- Dual channel mode requires identical module pairs to optimize memory controller bandwidth for the DELL Inspiron 5767.
- Operating 2 different module capacities simultaneously defaults system performance to single channel mode and creates a memory bottleneck.
- System architecture restricts total addressable memory to 16 GB even if 16 GB individual sticks are physically installed in the available slots.
- Installing modules with frequencies higher than 2400 MHz results in automatic downclocking by the BIOS to maintain chipset stability.
- Accessing the SO-DIMM slots involves removing the entire base shroud which necessitates non-marring pry tools to avoid structural damage.
- Low voltage 1.2V DDR4 modules are required to ensure thermal management within the confined chassis space.
- The absence of soldered memory on the motherboard allows for a complete replacement of the factory RAM configuration rather than just expanding it.