DELL Inspiron 7501 RAM upgrade specifications
DELL Inspiron 7000 Series 7501 supports DDR4-SDRAM memory upgrade with maximum RAM capacity of 24 GB. The laptop contains one SO-DIMM slot for memory expansion, operating at 2933 MHz frequency. Memory configuration combines on-board and SO-DIMM form factor. Compatible RAM upgrade specifications accommodate additional memory installation in available slots to maximize system performance and multitasking capabilities.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | On-board + SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2933 MHz |
| Maximum RAM | 24 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2933 (PC4-23464) |
| Bandwidth | 23.5 GB/s |
| Laptop Release date | 18 May 2020 |
Additional Notes
- The Dell Inspiron 7501 contains soldered memory on the motherboard, meaning only the single SO-DIMM slot is accessible for upgrades, capping practical expansion at 12 GB additional capacity regardless of module availability.
- DDR4-3200 modules will operate at 2933 MHz due to hardware limitation, resulting in approximately 0.8% bandwidth reduction compared to native specification but without compatibility risk.
- SO-DIMM modules rated for 3000 MHz or higher will downclock to match the 2933 MHz controller frequency, making premium-tier memory economically inefficient for this platform.
- Thermal constraints in the Inspiron chassis may restrict compatible SO-DIMM options to modules with low-profile heatspreaders under 30 mm total height to avoid contact with internal components.
- The single upgrade slot creates a single point of failure for all removable memory; if the SO-DIMM becomes defective, the system retains functionality only with its soldered allocation.
- Memory timing specifications (CAS latency, trfc) locked by firmware typically prevent manual tuning, eliminating overclocking as a compensation method for the reduced frequency.
- Warranty coverage remains valid for SO-DIMM replacement provided the module meets Dell's approved specifications; third-party verification is not required for installation.