DELL Precision 7720 RAM upgrade specifications
Dell Precision 7000 Series 7720 laptop supports memory upgrades utilizing four SO-DIMM slots compatible with DDR4-SDRAM modules operating at 2400 MHz frequency. Maximum RAM capacity reaches 64 GB total. Current upgrade specifications indicate compatible memory configurations for expanding system performance through additional RAM installation across available slots.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 4x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2400 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2400 (PC4-19200) |
| Bandwidth | 19.2 GB/s |
| Laptop Release date | 08 May 2018 |
Additional Notes
- Accessing all 4 slots often requires removing the keyboard as 2 slots are typically situated beneath the primary input deck while 2 are located on the bottom of the chassis.
- The 64 GB limit is achieved by populating 4 slots with 16 GB modules but this maximum capacity is only supported on systems equipped with Quad Core processors.
- Dual Core processor configurations on this motherboard architecture are restricted to utilizing only 2 of the 4 available memory slots resulting in a 32 GB ceiling.
- Mixing modules of different ranks or densities across the 4 slots can disable interleaving and force the memory controller into single channel mode reducing effective bandwidth.
- Installation of memory modules with frequencies exceeding 2400 MHz results in automatic downclocking to match the integrated memory controller speed of the 7th Generation Intel processors.
- The presence of 4 physical slots allows for high memory capacity without the necessity of expensive 32 GB high density modules which are incompatible with this hardware generation.
- Upgrading memory requires grounding to prevent electrostatic discharge from damaging the delicate traces near the SO DIMM sockets which are sensitive to voltage spikes.
- Full utilization of 4 slots increases the thermal load on the internal air cooling system necessitating periodic maintenance of the heat sinks to prevent thermal throttling under heavy workloads.