DELL Vostro 5501 RAM upgrade specifications
DELL Vostro 5000 Series 5501 laptop features two SO-DIMM memory slots supporting DDR4-SDRAM upgrades. Maximum RAM capacity reaches 32 GB with operating frequency of 3200 MHz. Compatible memory modules utilize SO-DIMM form factor specifications. Upgrade options allow expansion from factory-installed memory configurations to the full 32 GB maximum capacity through compatible DDR4-SDRAM modules meeting the specified frequency and slot requirements.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 29 July 2020 |
Additional Notes
- Dual channel architecture requires matching memory capacities and frequencies in both slots to optimize bandwidth for integrated graphics tasks.
- The presence of 2 SO-DIMM slots allows for a total replacement of factory modules without soldering restrictions usually found in thinner ultrabook designs.
- Operating at the 3200 MHz frequency provides the necessary throughput to prevent data starvation for the processor during multitasking.
- Upgrading the DELL Vostro 5501 to the 32 GB limit necessitates 2 16 GB modules because the system firmware does not support 32 GB single stick density.
- Physical installation requires standard small form factor modules as full sized desktop memory is electrically and dimensionally incompatible with the motherboard.
- Latency parity between installed sticks is essential to avoid system instability or automatic downclocking to the lowest common speed.
- The internal hardware layout permits access to the memory bank via the bottom panel which maintains the manufacturer hardware agreement if no other components are disturbed.