FUJITSU LIFEBOOK A555 RAM upgrade specifications
FUJITSU LIFEBOOK A Series A555 laptop supports memory upgrades through two SO-DIMM slots. Compatible RAM specifications include DDR3-SDRAM modules operating at 1600 MHz frequency. Maximum supported memory capacity reaches 16 GB total. Upgrade configurations accommodate SO-DIMM form factor modules. Specifications define compatible memory parameters for RAM replacement and expansion on A555 model systems.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR3-SDRAM |
| Frequency | 1600 MHz |
| Maximum RAM | 16 GB |
| Voltage | 1.5V |
| Number of pins | 204-pin |
| Interface | PC3 |
| PC Speed Rating | PC3-1600 (PC3-12800) |
| Bandwidth | 12.8 GB/s |
| Laptop Release date | 18 August 2017 |
Additional Notes
- Dual channel memory architecture is achievable only when identical modules occupy both slots, doubling the theoretical bandwidth compared to a single stick configuration.
- System stability requires DDR3L low voltage 1.35V modules because standard 1.5V DDR3 components often fail to initialize or cause thermal instability in this specific mobile chipset environment.
- Maximum capacity necessitates the installation of 2 individual 8 GB modules because the hardware architecture does not support 16 GB density on a single SODIMM.
- The 1600 MHz frequency ceiling acts as a hard limit for the integrated memory controller; installing higher rated modules like 1866 MHz results in automatic downclocking to the motherboard maximum.
- Access to the SO-DIMM slots involves a dedicated service hatch on the underside of the chassis, allowing for internal hardware modifications without breaching the primary casing seals or standard warranty terms.
- Memory modules must feature a 204 pin interface to ensure physical compatibility with the socket alignment keyways found in this generation of hardware.
- Latency timings are restricted by the BIOS, meaning high performance CL9 modules will likely default to standard CL11 profiles regardless of the SPD rating.