HP Pavilion 15-cs3645nd RAM upgrade specifications

HP 15-cs3645nd HP 15-cs3645nd HP 15-cs3645nd HP 15-cs3645nd HP 15-cs3645nd

HP Pavilion 15-cs3645nd RAM upgrade specifications include DDR4-SDRAM memory compatible with 2x SO-DIMM slots. The laptop supports maximum RAM capacity of 16 GB total, with memory operating at 2666 MHz frequency. Each SO-DIMM slot accommodates individual memory modules, allowing users to upgrade existing memory configurations. Specifications confirm DDR4 compatibility for this HP Pavilion 15 series model, with upgrade capacity reaching 16 GB when both memory slots are fully populated with compatible modules.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2666 MHz
Maximum RAM16 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2666 (PC4-21328)
Bandwidth21.3 GB/s
Laptop Release date25 August 2019

Additional Notes

  • The HP Pavilion 15-cs3645nd contains 2 SO-DIMM slots, permitting either single-channel or dual-channel memory configurations depending on existing module population.
  • DDR4-2666 memory operates at reduced frequency relative to contemporary DDR4 standards (3200 MHz typical), creating a performance ceiling that cannot be exceeded through module replacement alone.
  • The 16 GB maximum capacity indicates single modules are limited to 8 GB per slot, preventing asymmetrical configurations that would leave one slot unused while maximizing total capacity.
  • SO-DIMM form factor requires notebook-grade memory modules; desktop DDR4 DIMM modules are physically incompatible and cannot be installed despite electrical similarity to the DDR4 standard.
  • Upgrade to dual 8 GB modules from a single pre-installed module will transition the system from single-channel to dual-channel operation, doubling memory bandwidth availability for multithreaded workloads.
  • Warranty implications depend on original equipment manufacturer policy; removing or replacing factory-sealed memory may trigger warranty limitations on components affected by thermal or electrical changes during the upgrade process.
  • The 2666 MHz specification represents the maximum stable frequency supported by the motherboard controller, and modules rated above this frequency will downclock to 2666 MHz rather than operate at advertised speeds.